Insulation:
     This is a very important feature. Our insulation process starts at the foundation where Styrofoam perimeter insulation is installed under the concrete slab to insure that cold air does not penetrate from under the slab. During wall construction, insulation is installed between the bottom plates of the exterior walls and the slab. Before the wall insulation is installed each hole from the attic is carefully sealed. The windows and doors are also insulated where the frames meet the walls. Then the insulation is blown into the wall cavity around each pipe and wire. This system totally fills the space between each stud giving a R-15 value. Before the brick is applied to the exterior each window and seam in the wall sheeting is sealed. The attic space is insulated with a R-30 blown in insulation.Roof wind turbines are installed to ventilate the attic space.