History:
For
over 20 years Jeff Witt has been committed to excellence, building the
best possible home. His ability to encourage and enable those who
work with him to achieve the very highest standards of quality has resulted
in a long list of satisfied customers. It is his experience, and his commitment
to quality, that shows in every Witt Home. Whether you are having a home
custom built on your site or choose a site in one of our additions please
consider the following reasons that have helped make us a success.
![]()
Architectural
Design:
We can assist you in the design of
your new home by providing you with a custom design plan by our in-house
Computer Aided Drafting System. Throughout the design process you will
be able to make informed design decisions and changes as the plan develops
from preliminary to final working drawings.
Communities:
Choosing
where we build our homes is as important to us as how we build them. You
will find our homes in some of the most reputable and family-oriented neighborhoods
in the city. Please visit one of our homes today and allow us to build
your family's DREAM HOME.
Foundation:
Each
foundation is carefully installed to meet the needs of the location and
house plan. Whether it is a pier and grade beam or footing and stem each
foundation is built with no shortcuts taken. Each stemwall has steel reinforcing
not only in the footings but the stemwall as well for maximum strength.
Each foundation is poured with 3500 PSI concrete. All interior bearing
walls are supported by a thickened slab beam reinforced with steel.
Construction:
We
build with a focus on high quality at a competitive price. On site supervision
is provided by myself. There are no middle management people to deal with.
We work together throughout the construction of your new home so it is
just right for you. Unlike some builders, I will be happy to make any changes
to the home that you would like.
2-Story floor
systems:
In
2 story homes there are typically two flooring systems a builder can use.
A dimensional lumber joist system or a floor truss system. We use the floor
truss system that is engineered to carry the weight of the second floor
and roof for the life of your home. A structural engineer designs a floor
truss system for each floor plan then we use 1 1/8" tongue-and-groove plywood,
glued and screwed, to insure a squeak proof floor.
Mechanicals:
The
importance of the plumbing, heating & air, and electric systems are
often overlooked. We take great care to give the customer the best when
it comes to these mechanical systems. We use only the best contractors
who will stand behind their work and take care of the customer long after
the sale. We use Wirsbo Aquapex water systems with their 25 year limited
warranty. Our plumbing systems are installed only by Plumbing Solutions
Inc. We offer high efficiency heating and air systems with two options,
either the duct work installed overhead in the attic space, or under the
slab. If the duct work is installed under the slab we will only use a all
plastic PVC system insuring against water and rust damage to the duct work.
Our heating and air systems are installed only by Temp-Control Inc.
Our mechanical contractors are committed to service and customer satisfaction.
If you ever experience a problem you will be totally satisfied with the
service they provide. Experienced technicians, radio dispatched trucks,
and total customer service are the reasons they do all of our work.
Insulation:
This
is a very important feature. Our insulation process starts at the foundation
where Styrofoam perimeter insulation is installed under the concrete slab
to insure that cold air does not penetrate from under the slab. During
wall construction, insulation is installed between the bottom plates of
the exterior walls and the slab. Before the wall insulation is installed
each hole from the attic is carefully sealed. The windows and doors are
also insulated where the frames meet the walls. Then the insulation is
blown into the wall cavity around each pipe and wire. This system totally
fills the space between each stud giving a R-15 value. Before the brick
is applied to the exterior each window and seam in the wall sheeting is
sealed. The attic space is insulated with a R-30 blown in insulation.Roof
wind turbines are installed to ventilate the attic space.
Exterior:
For
lasting beauty and protection against the extreme Oklahoma weather we use
only 100% clay bricks. With clay bricks, the color is blended through the
brick, compared to concrete brick which has color only on the outside.
We recommend Acme Brick with their 100 year guarantee.
Interior
Design:
Consultation
is available with an interior designer as part of our construction service,
in order to assist you in selection of colors & styles for your interior
finish. Our in-house cabinet and trim crew insure you of only the finest
built cabinets and trim work. Each home has custom built cabinets made
specifically for your home.
Financing:
Whether
you are buying a finished home and in need of a Permanent loan or a custom
home dealing with a Interim Loan I can assist you with this process by
providing you with a variety of different financing programs offered through
various lenders.
Committed to Owner Satisfaction,
Jeff Witt, Builder
Member, National Association of Home Builders
Member, Central Oklahoma Home Builders Association
Oklahoma Association's Board of Directors 1995-1996
Central Oklahoma Home Builders Association's
Board of Directors 1995-2000
Member of the Residential Warranty Corporation
10 year warranty